Land Rover Series 1 ByPass Hose & Double Wire Clips 1948-54 80″ 86″ 107″
£20.00
This hose is suitable for the 1600cc and 2 litre Siamese bore engine as fitted to the 80inch and early 86inch and 107inch. We have had these hoses specially made to replace the no longer available originals.
They are British made and have been produced with old Dunlop Tooling and so are to the same specification as the originals.
There are 2 double wire clips, 1 x inlet elbow hose (bypass) 212345.
This hose is suitable for the 1600cc and 2 litre Siamese bore engine as fitted to the 80inch and early 86inch and 107inch. We have had these hoses specially made to replace the no longer available originals.
They are British made and have been produced with old Dunlop Tooling and so are to the same specification as the originals.
There are 2 double wire clips, 1 x inlet elbow hose (bypass) 212345.
Hoses
Only suitable for 80″ and early 86″ models.
212345 Inlet Elbow Hose
The clips are zinc plated and lacquered to a very high standard, they have been manufactured by the original Land Rover Supplier!! They are not copies made in China and so have high corrosion resistance.
These clips will finish off any quality restoration.
There are 2 clips per set and are as follows:
Land Rover Part Number
50320 x2 Inlet elbow