Land Rover Series 1 ByPass Hoses & Double Wire Clips 86″ 88″ 107″ 109 1955-1958

This is suitable for the 2 litre Spread bore engine as fitted to the 86 inch and 107 inch Series 1 vehicles from 1954-1956. 88 inch and 109 inch Series 1 vehicles 1956-1958.  

We have had this hose especially made to replace the no longer available originals. They are British made and have been produced with old Dunlop Tooling and so are to the same specification as the originals. 

There are 2 double wire clips & 1 x bypass hose 242056.

This is suitable for the 2 litre Spread bore engine as fitted to the 86 inch and 107 inch Series 1 vehicles from 1954-1956. 88 inch and 109 inch Series 1 vehicles 1956-1958.  

We have had this hose especially made to replace the no longer available originals. They are British made and have been produced with old Dunlop Tooling and so are to the same specification as the originals. 

There are 2 double wire clips & 1 x bypass hose 242056.

Hoses

Only suitable for 86″ 88″ 107″ & 109″ models with the 2 litre Siamese bore petrol engine. 

242056       By Pass Hose Thermostat Housing

The clips are zinc plated and lacquered to a very high standard, they have been manufactured by the original Land Rover Supplier!! They are not copies made in China and so have high corrosion resistance.  

These clips will finish off any quality restoration. 

There are 2 clips per set and are as follows:

Land Rover Part Number 

50320  x2      Inlet elbow